Stair Handrail Indoor Protective Railing Balcony Fence Aluminum Alloy Profile Customization
Basic Information
|
Name
|
JY1-03-13 |
|
Material
| Zinc steel, aluminum alloy |
|
Surface
Treatment
|
surface coating electroplating paint |
|
Colour
|
As customer's requestments |
|
Temper
|
T4 |
|
Shape
| As customer's requestments |
|
Certification
|
ISO 9000;ISO 9001;ISO 14000;CQC;RoHS; |
Product Display
Indoor stair handrails are generally made of wooden handrails, taking into account the comfort of people's grasping, and the size is related to the size of the human body. Plastic handrails also feel good, but they are less durable and are not used much anymore. Metal handrails have good durability and wear resistance, can be processed into various shapes, and are widely used in public buildings. Therefore, wooden handrails are used more, and they are generally made of hard wood with better wear resistance.
The installation method of the handrail is relatively simple. The wooden handrail is generally fixed on the flat steel on the top of the railing with wood screws; the plastic handrail is stuck on the flat steel on the top of the railing by its softness; and the metal handrail can be directly welded with the metal rod.
Railings are generally installed on the suspended side of the ladder section and ladder well, but when the ladder section is wide, a handrail is also required on the side against the wall, which is called a handrail against the wall. The height of the handrail against the wall is the same as the height of the handrail on the suspended side. The general installation method is to reserve holes on the block wall every 1000 mm, the size is 100mm × 60mm × 60mm, install the dovetail-shaped iron feet in them, use cement mortar or fine stone concrete to fix them, and then install the handrails on the iron. feet. If the wall is concrete or reinforced concrete wall, it is necessary to embed iron parts and weld the iron feet to it. In order to ensure the convenience of grasping, the center line of the handrail should be no less than 100 mm away from the wall.
When the stair section is connected to the platform, or when the stair section is turning, due to the different heights of the stair section and the different starting positions of the steps, the height of each section of the railings will be inconsistent. In order to ensure the continuous smoothness of the handrail, some treatment is required. The usual practice is to naturally extend the handrails to the platform, so that the handrails are connected at the same height, which will reduce the width of the platform; or step back the descending stairs, the handrails can also be connected smoothly, but the length of the stairs is increased. step. When there is a long and short run on the ladder, there is a horizontal railing on the platform, and its height should not be less than 1050 mm. As shown in Figure 3, there are several treatment methods for the height difference of the handrail at the turning point of the stairs.
The handrail is a component located at the top of the railing or the railing and the side wall of the stairway for people to climb. Its form and selection of materials must not only meet the requirements of people's climbing and support and comfortable hand feeling, but also meet the requirements of decorative components. Commonly used in hardwood, plastic, reinforced concrete, terrazzo, marble, metal profiles. There is no uniform standard for its form, and the specific method is determined by the detailed construction drawings of the building.
Stair handrails are handrails built on stairs to ensure structural stability and safe use. Stair handrails are often supported by vertical railings, which can be attached to either side of a column at one end of the stair, or connected to a continuous middle column of the wall. There is a style of balustrade called a spiral balustrade, where a gooseneck (a vertical piece that allows it to connect to a higher handrail on a balcony or platform) is installed at the handrail if the stair has rounded steps.
Certificates and Honors
Factory display
Company Profile
Jiangyin Longkang Metal Products Co., Ltd. is located in Zhouzhuang Town, Jiangyin City - the largest aluminum extrusion profile production base. Covering an area of more than 35,000 square meters with more than 350 employees. We focus on metal customization, special-shaped aluminum profiles, aluminum profiles, aluminum tubes, rail transit series, doors and windows aluminum profiles, heat sinks, CNC processed aluminum profiles, interior decoration series, bending series, etc. We also have precision anodizing and various surface treatments, such as PVC film, wood grain, electrophoresis, powder coating, anodizing, etc. After more than 20 years of development, The company has become a modern aluminum production enterprise with perfect quality management system.
Efficiently treating our customers as partners with sincerity, specialization and satisfaction is our managerial principle. Attributed to the backup of a dedicated technical team, filled with wide and profound knowledge and practice in aluminum profile and world trade for 20 years, the company owns rich experience in product quality control and profile physical properties such as Hardness, Stretchability, Flatness, Straightness, and Tolerance etc. In line with the principle of sharing the preferential cost and joint development, the company has formed an interest community for years with its customers at home and abroad. Sincerely to build up a pleasant mutual trust, cooperative, win-win and value-added sustainable partnership is what we are achieving to grow together with you!
The company has the ability to develop and design molds independently, we can produce any extruded aluminum profiles according to your mechanical drawing or sample. Longkang has 10 extrusion production lines (600-3500 tons), one automatic oxidation electrophoresis production line, vertical and horizontal spraying production line per each, and a variety of advanced supporting production, processing and testing equipments. There are also CNT digital control drilling and milling machine(CNC), double head saw, hydraulic saw and punching machine in our processing workshop. The complete technological process can benefit to reduce the production turnover times for semi-finished products, to avoid the damage during transportation, improve the production efficiency, reduce the cost of production,and to ensure the quality and delivery time.
FAQ
Q: What about the delivery time?
A: Average 12 working days, 7 days for mold opening, 10 days for mass production
Q: How do you ship your goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. Usually it takes 3-5 days to arrive. Air and sea shipping are also optional.
Product Tags:
|
|
Metal Aluminum Stair Railing Indoor Interior Handrail Images
|
